Air Compressor Parts & Accessories
Original Spare Parts - Fusheng air compressor
Genuine OEM (Original Equipment Manufacturing) parts are best choice for your air compressors. Follow the manufacturer recommended maintenance schedule. Always consult a professional and always insist that genuine OEM parts are utilized for your service needs is critical for maximizing your compressor life span.

Piston

Connecting rod

Main Bearings

Piston Rings Set
Pressure Switch
APPLICATION: Suitable for use on all piston/reciprocating air compressors: Swan, Puma, Jaguar, Ingersoll-Rand (IR), Hitachi,etc. Air compressor pressure switches use air lines to monitor pressurized air as it moves to and from your air tank. All pressure switches have some element that reacts when pressure is applied to it.
150 PSI - WITH UNLOADER VALVE & AUTO-OFF DISCONNECT LEVER

SINGLE PORT: G-1/4"
Factory set: 85-115 psi
Differential pressure: 30-40 psi
Operating pressure: 35-150 psi
Elec. rating: 12A/240VAC

4-PORT: G-1/4"
Factory set: 85-115 psi
Differential pressure: 30-40 psi
Operating pressure: 35-150 psi
Elec. rating: 12A/240VAC

SINGLE PORT: G-1/4"
Factory set: 85-115 psi
Differential pressure: 30-40 psi
Operating pressure: 35-150 psi
Elec. rating: 26A/240VAC
190 PSI - WITH UNLOADER VALVE & AUTO-OFF DISCONNECT LEVER

SINGLE PORT: G-1/4"
Factory set: 130-175 psi
Differential pressure: 40-55 psi
Operating pressure:70-190 psi
Elec. rating: 12A/240VAC

4-PORT: G-1/4"
Factory set: 85-115 psi
Differential pressure: 30-40 psi
Operating pres.: 35-150 psi
Elec. rating: 12A/240VAC
5-PORT 145 PSI - WITH UNLOADER VALVE & AUTO-OFF DISCONNECT LEVER

FIVE PORT: G-1/4"
Factory set: 130-175 psi
Diff. pres. : 40-55 psi
Operating pres.: 70-190 psi
Elec. rating: 12A/240VAC

FIVE PORT: G-3/8"
Factory set: 85-115 psi
Diff. pres. : 30-40 psi
Operating pres.: 35-150 psi
Elec. rating: 12A/240VAC
250 PSI - WITH UNLOADER VALVE & AUTO-OFF DISCONNECT LEVER

SINGLE PORT: G-1/4"
Factory set: 145-175 psi
Diffential pressure: 25-60 psi
Operating pressure: 40-250 psi
Elec. rating: 20A/240VAC

SINGLE PORT: 3/8" Rc
Factory set: 145-175 psi
Diff. pres. : 25-60 psi
Operating pres.: 40-250 psi
Elec. rating: 20A/240VAC
14 BAR WITH UNLOADER VALVE & ON-OFF KNOB

SINGLE PORT: G-1/4"
Factory set: 7.5-10 Bar
Diff. pres. : 2.5-4 Bar
Operating pres.: 5-14 Bar
Elec rating: 26A (UL)/240VAC

FOUR PORT: G-1/4"
Factory set: 7.5-10 Bar
Diff. pres. : 2.5-4 Bar
Operating pres.: 5-14 Bar
Elec rating: 26A (UL)/240VAC
CONDOR MDR2/11 - 14 BAR WITH UNLOADER VALVE & ON-OFF Knob

SINGLE PORT: G-1/4"
Factory set: 110-150 psi
Diff. pres. : 30-40 psi
Operating pres.: 60-180 psi
Elec rating:

FOUR PORT: G-1/4"
Factory set: 110-150 psi
Diff. pres. : 30-40 psi
Operating pres.: 60-180 psi
Elec rating:
3 PHASE 400VAC, 16 BAR WITH UNLOADER VALVE & ON-OFF KNOB

SINGLE PORT: G-1/4"
Factory set: 8-10 Bar
Diff. pres. : 1.8-405 Bar
Operating pres.: 4-16 Bar
Elec rating: 25A / 400V
AIR FILTER ASSEMBLY
APPLICATION: compatible with and fit Fusheng, Swan, Puma, Ingersoll-Rand, Jaguar, Hitachi compressors. Air filter is one of the most important components in a compressed air system. In addition to removing solid particles and contaminants, the compressor air filter helps the unit operate more efficiently and minimizes the impact of wear and tear in moving mechanism

2 Hp Compressor
Connection size: G-1/2"

5-15 Hp Compressor
Connection: G-1"

ELGI, IR
Connection: G-3/4"

ELGI, IR
Connection: G-1"

IR 231/234
Connection: G-3/4"

IR 2340/2475/242
Connection: G-1"

IR 253
Connection: G-1-1/4"

IR 2540/2545
Connection: G 1-1/4"

IR. 7T2 / 71T2 / 7100
IR. I15T / 15T2 / 3000
Connection: G 1-1/2"
Air Filter Elements
APPLICATION: Fit on Fusheng, Swan, Puma, Jaguar, Ingersoll-Rand, Hitachi. The air compressor inlet filter protects your compressor from outside dust and dirt. This is important, because all the dust that is sucked in by the air compressor eventually ends up in the heart of the compressor mechanism

Dimensions: OD x ID x H
Size: 112x76x50 (mm)

FUSHENG
size: 109x75x74 (mm)

FUSHENG
size: 111x76x54 (mm)

OD x ID x H mm
size: 65x28x45 (mm)

SWAN
Size: 84x48x85 (mm)

HITACHI
65 x 78 x 94 (mm)

PUMA
70 x 35 x 65 (mm)

ELGI, IR
64 x 28 x 80 (mm)

Ingersoll-rand 5-7.5 Hp
size: 111x76x57 (mm)

HITACHI
size: 65x78x94 (mm)

ELGI 5 - 15 Hp
121 x 88 x 163 (mm)
Check Valves
APPLICATION: can fit Swan, Puma and China air compressors.
A check valve is a fitting that allows compressed air to flow through it, but only one way. If the air tries to flow back up through the check valve, the valve flapper or similar device shuts, and air cannot escape. Compressed air flows into the compressor tank from the pump through the tank check valve fitting.
TAIWAN COMPRESSOR - STRAIGHT TYPE - BRASS

SWAN, connection: 1" x 1"

Conn. 1/2" x 1/2"

Conn. 3/4" x 3/4"

Conn. 1" x 1"
GUN TYPE - CAST IRON

Conn. 1/2" (65mm)

Conn. 1/2" x 1/2"

Conn. 3/4" x 3/4"

Conn. 3/4" x 3/4" (NPT)

Conn. 1" x 1"

Conn. 1" x 1" (NPT)
Tank Mounted Check Valves
APPLICATION: Can fit Ingersoll-rand compressors
IN-TANK CHECK VALVE - IR TYPE - BRASS & ALUMINIUM

Connection: 3/8" x 3/4"

Conn. 1/2" x 3/4"

Conn. 3/4" x 1"

Conn. 1" x 1"

Conn. 1" x 1-1/2"
Check Valve Kits
NYLON TYPE

Sizes (Ø mm): 15, 16, 20,
23, 25, 28, 32
POLY TYPE

Sizes (Ø mm): 15, 23
65x19, 80x19, 90x28
100x28, 23 (Big)
Auxilliary Unloader Valves
What the unloader valve does is that is responds to the compressor pressure switch turning the power off to the motor and allows any air that may be trapped over the piston, or pistons on a multi-cylinder air compressor, to vent to atmosphere, removing any load that the trapped air may have created over the cylinder

Connection: 1/2"
Pressure: 100-150 psi
HEAVY DUTY AUXILLIARY UNLOADER

Connection: 1/4"
Max. pressure: 260 psi

Connection: 1/4"
Max. pressure: 600 psi
Oil Level Sight Glass Plastic Type
Air compressors require constant oil lubrication to prevent friction on the pistons, cylinders and other moving parts. Oil level sight glass is for your to check your compressor has oil before starting it. t may be found on the base of the pump for reciprocating type compressors

Connection: 2", 1-1/2",
1-1/4"

Connection: 1", 3/4", 1/2"
Oil Level Sight Glass Aluminium Type

Connection: 1-1/2", 1-1/4"

Connection: 1", 3/4", 1/2"
Piston with 3 Rings

Piston Diameter:
65 mm x 3 rings

Piston Diameter:
80 mm x 3 rings

Piston Diameter:
90 mm x 3 rings
Piston with 4 Rings

Piston Diameter:
80 mm x 4 rings

Piston Diameter:
90 mm x 4 rings

Piston Diameter:
100 mm x 4 rings
Piston 3-Rings Set

Diameter: 65 mm x 3
Compression: 2.5mm x 2
Oil ring: 4 mm x 1

Diameter: 80 mm x 3
Compression: 2.5 mm x 1
Scrapper: 2.5 mm x 1
Oil ring: 4 mm x 1

Diameter: 90 mm x 3
Compression: 3 mm x 2
Oil ring: 4.5 mm x 1
Piston 4-Rings Set

Diameter: 80 mm x 4
Compression: 3 mm x 2
Oil ring: 4.5 mm x 2

Diameter: 90 mm x 4
Compression: 3 mm x 1
Scrapper: 3 mm x 1
Oil ring: 4.5 mm x 2

Diameter: 95 mm x 4
Compression: 3 mm x 1
Scrapper: 3 mm x 1
Oil ring: 5 mm x 2

Diameter: 100 mm x 4
Compression: 3 mm x 2
Oil ring: 4.5 mm x 2

Diameter: 120 mm x 4
Compression: 3.5 mm x 2
Oil ring: 5 mm x 2
Pressure Gauges

Diameter 60 mm
Conn. 1/4", Bottom
Pressure: 0-16 Bar

Diameter 60 mm
Conn. 1/4", Bottom
Pressure: 0-25 Bar

Diameter 100 mm
Conn. 1/2", Bottom
Pressure: 0-16 Bar
Breather Cap
The purpose is to allow air to come in to the oil chamber and vent out to the atmosphere.

FUSHENG
16 x 1.5

FUSHENG
20 x 1.5
Connect with us
Contact us today for more info. - 06-317 2118